Hydraulic Metal Splitter 4mm tube
Thursday 10 July 2014
SMC hydraulic joint 4mm tubing
SMC Hydraulic Joint 4mm Tube
SMC M5-H4 / M5-L4
SMC M3-H4 / M3-L4
SMC M5-H4
SMC M5-H4
SMC M5-H4
SMC M5-L4
SMC M5-L4
SMC M5-L4
SMC M3-H4
SMC M3-H4
Unit Price RM25.00 / US $8.00
T joint for rc hydraulic 4mm
T Joint For RC Hydraulic 4mm
Price RM35.00 / US $11.00
Hydraulic cylinders oil seal.
Cylinder oil seal 9*5*7mm
Cylinder replacement oil seal
Price RM18.00 / US $5.60
Wednesday 18 June 2014
Single hydraulic valve and servo.
3 units single hydraulic valve for Rc excavator use.
http://www.youtube.com/watch?v=1Qybrn-XrvQ
Valve tested in very good condition no internal liking problem. It come white servo Tower Pro MG946R.
4 x 2.5mm nut luck nipper.
Stock available 3 units only.
Price RM600.00 / US $190.00 (FREE POSLAJU FOR MALAYSIA ONLY)
Valve tested in very good condition no internal liking problem. It come white servo Tower Pro MG946R.
4 x 2.5mm nut luck nipper.
Stock available 3 units only.
Price RM600.00 / US $190.00 (FREE POSLAJU FOR MALAYSIA ONLY)
Monday 16 June 2014
Rc hydraulic excavator 1/16 scale
Rc hydraulic excavator 1/16 scale (CAT390D)
非德國bruder 1:16 全金屬液壓 遙控挖土機(CAT-390D)
http://www.youtube.com/watch?v=s2OSrdetFK4
http://www.youtube.com/watch?v=_p58OOqjeu0
模型的概述•該模型設計的初衷是，製作一款在：尺寸，重量，力量，及速度方面均以原型機的1：16比例為標準，結構佈局上最大限度的追求仿真，及工作時間上盡可能長的機器。-結構•製作方式上，與原型機一樣我們採用了鋼片焊接的方式，及相同的結構設計，為高壓的工作系統提供了足夠的結構強度，和結實的力學支撐。-設備的佈局•上部車體各種設備之間緊湊的佈局設計，最大限度的預留出了1300cc的電池空間，使其能配備更大容量的電池，為機器提供更長的工作時間。-液壓系統•液壓泵標準的壓力及流量輸出為使機器產生了與原型機一致的力量及運動速度。高效率的設計，使其在很小的能量消耗下工作。•液壓缸的尺寸及行程完美的再現了原型機工作裝置的運動角度。• 液壓閥的設計是獨創的技術，在操作中可以在不改變泵輸出流量的狀態下，隨意通過改變對應的遙控器控制桿的幅度來相應的調節大臂，鬥桿，鏟斗的直線運行速度，使機器的操作更靈敏。-迴轉系統•在迴轉結構上我們採用了CNC鋼齒輪圈12點支撐的結構，使上下部分車體的連接更牢固，精密的設計使磨損更小壽命更長，旋轉速度及扭距也與原型機一致。同時配備的中央旋轉接頭可以保證無限的旋轉幅度。-履帶•與原型機一樣履帶為鋼製雙肋履帶板，鏈骨中間開設排泥孔，能使夾在鏈骨中的泥土能順利的被擠壓出來。-行走系統
•採用彈性引導輪的結構，可以再履帶夾著小石塊的情況下保證驅動輪正常轉動。•驅動輪採用精密的雙軸承支撐與大齒輪圈結構，理想的設計使其能性能更可靠，壽命更漫長，旋轉速度及扭距也與原型機一致。-控制系統
•控制方式：泵電機為開關控制，泵的流量不可調節，大中小缸的速度可通過遙控器搖桿的幅度動態調節，旋轉速度可調節，驅動輪的轉速為並聯調節。-升級
•遙控器剩餘一比例通道，玩家可自行改裝或升級連接LED車燈。-數據表：-規模 1：16，駕駛室高度20.3cm，底盤寬度22.4cm，伸出總長91.2cm，履帶寬度4cm。
-重量 19公斤。-工作壓力 35bar-工作時間 2小時-電源 12V7Ah-遙控器 7比例通道和1路開關-速度：-工作裝置水平最大提升速度 5.5S-旋轉最高速度 5.5r/min-左右驅動輪最高轉速 18r/min
◎配備：標準可拆卸工程液壓油缸 ， 比例換向閥 ， 標準無限回轉座圈總成 ，精密驅動輪總成 ， 高仿真雙筋金屬履帶 ， 彈性誘導輪 ， 12v7000mah電池 標準操作時間為兩小時 以上
Delivery schedule : About 30-60 days (Made in china)
Price RM15,900.00/ USD $4968
excluding local shipping.(limited stock)
Saturday 26 April 2014
1/12 Scale Hydraulic Wheel Loader
Specifications:
- CNC machined aluminum parts
- Molded steel bucket
- 6 channel 2.4Ghz radio
- Optimized steel hydraulic system
- Scale operator station (can fit a driving figure)
- Massive 29.5-25L-5 tires
- Reliable hydraulic valve and adjustable pump
- Heavy duty hoses (OD 4.5mm Nylon, ID 2.5mm)
- Powder coated in yellow
- Brushless system (hydraulic)
- 40A brushless ESC with BEC
- XXX Kv brushless monster torque motor
- Realistic non functional disk break
- Scale ABC plastic interior
- Wheel with planetary gearbox build-in
- 2 speed full metal transmission (1:16 and 1:4 gear ratio)
- Realistic fullfull metal axles
- Run time is: XX minutes (XXXXmAh battery)
- Steel machined oil pump (45mm X 30mm X 15.5mm)
- Bucket capacity:
- Maximum bucket force: 70kg/154pounds
- Driving speed: XXX meter per hour
- Scale: 1:12
- Length: 741mm/29inch
- Width: 276mm/11inch
- Height: 276mm/11inch
- Maximum bucket height: 461mm/18inch
- Maximum bucket up and down angle: 46 to 64 degrees
- Maximum bucket left and right angle: 38 degrees
- Wheel base: 284mm
- Deadweight: 20.5kg/45lbs
- Total mass load: 32kg/70lbs
- Operating oil pressure: 20Bar, 290psi
Additional parts needed:
- Lipo Charger
- 3S 6500mAh 11.1v 20c Lipo battery (Max size: 73mm X 80mm X 132mm)
- ESC support bullet connector
- Hydraulic Oil
Delivery schedule : About 30-60 days (Made in china)
Price RM15,950.00/US $4984
excluding local shipping.(limited stock)
1/14 8x8 Hydraulic Dump Truck (Full Metal)
1/14 8x8 Hydraulic Dump Truck (Full Metal)
Is one of the most powerful R/C hydraulic dump truck available today.
Highly detailed base on European style dump truck. Engineered
specifically for the tough demands of transporting gravel, sand,
asphalt, snow, wood chips or rocks. Created for the customer who
requires reliability and high production in bulk earth moving or
construction projects. CNC machined metal parts, fully assembled, ready
to work! Massive power through 1000kV high speed brushless system.Specifications:- Hard plastic European style front Cab
- Full metal 2 speed transmission (Planetary gears)
- European style V shape dumper
- Full electronic sound system (engine start, idle and more)
- Transfer case (billet alum)
- Scale fuel tank (billet alum)
- Super scaled leaf spring suspension setup
- Scale rims (billet alum)
- Remote lockable rear axle (locking differential)
- Full metal front and rear axle housing
- Steel scale drive shaft
- Realism front cab latch
- Retractable steel ladder
- Molded functional fuel tank (filled with hydraulic oil)
- Automatic trailer gate (do not attempt to open it by hand)
- Retractable steel ladder
- Rear light guard (protect against rock)
- Scale light bucket (fit 3-5mm LED)
- Recommended payload: 16kg/35lbs
- Maximum lift power: 42kg/92lbs
- Fully painted
- Scale fire extinguishers and spare wheel/tire
- Cylinder maximum thrust: 109kg/231 lbs
- Brushed driven motor
- 1000kV Brushless motor-driven micro hydraulic pump
- Length: 687mm/27inch
- Width: 186mm/7.3inch
- Height: 262mm/10.3inch
- Weight: 8kg/17lbs
- Axle gear ratio: 2.6:1
- Transfer case gear ratio: 1:1
- Theoretical load: 15kg/33lbs
- Load total mass: 23kg/50lbs
- First gear 1:16, second gear 1:4 (Transmission)
- Basic 6 channel 2.4Ghz radio
- Basic 60T 540 motor
- This product is professionally pre-assembled
What else do you need:- Battery - 3s battery. (11.1 volt 4200mah)
- Charger
- 1x Hydraulic Oil
Video show. http://v.youku.com/v_show/id_XNTU4ODgyNTEy.html
Delivery schedule : About 30 days (Made in china)
Price RM14,650.00/US $4578
excluding local shipping.(limited stock)
Subscribe to:
Posts (Atom)